Call now 020 3576 5825
Places of worship

Heating & plumbing for places of worship

Heating, ablution areas, kitchens and WCs for churches, mosques, gurdwaras, temples, synagogues and halls, planned around worship times and bookings.

Call 020 3576 5825 WhatsApp us

Tell us about your premises

Name, phone and postcode are all we need to start. Everything else can wait.

When do you need us?
Your address and more detail optional

Or call 020 3576 5825 WhatsApp +44 7447 575645

Your details are used only to handle this request. Privacy policy

  • Gas Safe registered Legal, signed-off gas work, every time
  • Fully insured Public liability insurance on every job
  • DBS-checked engineers Background-checked people in your home
  • Price agreed first The figure is settled before we begin
  • F-Gas certified Qualified for air con refrigerant work
  • Workmanship guaranteed Every job is backed by our guarantee
What we do

Church heating, wudu areas and plumbing for places of worship in London

Church heating, a busy wudu area before Friday prayers and a kitchen that feeds a crowd after worship all ask a lot of a building's pipes. Ninja Plumbers looks after heating, hot water and plumbing for churches, mosques, gurdwaras, temples, synagogues and community and village halls across London and nearby Surrey. We repair and improve heating in tall, occasionally used buildings, plan and refit ablution facilities, protect quiet buildings from frost and keep kitchens and WCs working. Our Gas Safe engineers work on domestic-sized boilers, and we will tell you straight if your plant is larger. Work is planned around worship times, festivals and hall bookings.

What jobs do we take on for places of worship and community halls?

  • Church heating repairs on domestic-sized boilers
  • Radiators, zoning, timers and frost thermostats
  • Wudu station and ablution area refits
  • Low-level taps, seating and foot-washing positions
  • Thermostatic mixing valves fitted and replaced
  • Hot water sized for peak prayer times
  • Hall and langar kitchen sink plumbing
  • Floor gullies, channel drains and blockages

One team, around your hours

Plumbing, heating, drainage, electrics and air conditioning from one company, so a job that needs more than one trade is booked once. We work early, late or at weekends so you can keep trading, and the price is agreed before anything starts.

At a glance

Who does plumbing for places of worship and community halls in London?

Ninja Plumbers does. We are a London plumbing, heating and electrical company with our own engineers and electricians, and we look after places of worship and community halls across Greater London and nearby Surrey, working around your opening hours with the price agreed before anything starts.

Who it is for
Places of worship and community halls in London and nearby Surrey
What we do
Plumbing, heating, drainage, electrics and air conditioning, from one team
Typical jobs
Church heating repairs on domestic-sized boilers; Radiators, zoning, timers and frost thermostats; Wudu station and ablution area refits; Low-level taps, seating and foot-washing positions
Where
Greater London, plus Guildford, Woking and nearby Surrey and north-east Hampshire towns
When
Planned work early, late or at weekends, around your opening hours. Emergency callout 24/7.
Who does the work
Gas Safe registered engineers, registered electricians and F-Gas certified air conditioning engineers. DBS-checked, directly employed and fully insured.
Price
Agreed with you before any work starts. Workmanship guaranteed. Card or cash.
How to book
Call 020 3576 5825, message us on WhatsApp, or use the form at the top of this page.

Page updated

What premises like yours need

What do places of worship and community halls need from their plumbing, heating and electrics?

  • Heat where and when people gather

    A tall nave, prayer hall or temple hall used for a few hours a week has to be warm when people arrive without burning gas the rest of the time. Many buildings do better with zones: the main space brought up gently before worship, and quicker heat in rooms used during the week, such as a vestry, classroom or office. Where people sit or pray on the floor, underfloor heating can work well. We repair radiators and pipework, fit better controls, and our electricians can wire heaters for smaller rooms.

  • Wudu and ablution areas built for the rush

    Ablution facilities are used hard in short bursts, with many people washing hands, face, arms and feet in the minutes before prayer, and busier still at Friday midday prayers and during Ramadan and Eid. A good wudu station has a row of low-level taps with fixed seating, a comfortable place to wash feet, a floor laid to fall into gullies or a channel drain, and anti-slip, easy-clean finishes. Hot water has to be sized for that peak, with thermostatic mixing valves keeping it at a safe, comfortable temperature.

  • Kitchens and WCs that work in bursts

    Halls host toddler groups, lunch clubs, classes and celebrations, and a gurdwara langar kitchen may cook and wash up for large numbers every day. Sinks, hand-wash basins, water heaters and dishwashers need to keep up, and drains need protecting from fat. Some kitchens keep separate sinks for different uses, such as meat and dairy. We do the plumbing side and fix running toilets and blocked wastes. Commercial catering gas equipment such as large burners and ranges needs engineers with commercial gas qualifications, and we will say so plainly.

  • Frost protection for quiet buildings

    An empty building in January is where burst pipes happen. Pipes in unheated vestries, lofts, towers, ablution rooms and outside toilets are most at risk, and a leak can go unnoticed until the next gathering. Lagging exposed pipes, a frost thermostat that brings the heating on at a low temperature, and a stopcock that volunteers can find and turn all help. For buildings left empty for long spells, draining down part of the system may be the safer option, and we can do that and refill it later.

Getting the heating on in time

Thick stone and brick walls soak up heat, so a church, temple or hall used on a weekend morning may need the heating on for several hours beforehand, sometimes from the evening before. A programmable timer, or an optimising controller that learns how long the building takes to warm, saves guesswork and wasted gas. Keep internal doors closed and deal with obvious draughts. A low background setting between services can help protect the fabric, organ and furnishings from damp, but check with your architect or your faith body's building advisers on what suits your building.

Planning an ablution or wudu area

Start with numbers: how many people wash at the busiest prayer, and roughly how long each takes. That peak decides how many wudu positions you need, how much hot water must be stored or heated, and how large the drains and gullies should be. Fix seats at a comfortable height with taps within easy reach, and add a grab rail for older worshippers. Floors need a slip-resistant finish laid to fall, with walls that wipe clean. Plan an accessible position, separate areas where your community needs them, and an extractor fan to keep damp down.

Legionella, quiet weeks and approvals

Buildings used once or twice a week leave water standing in pipes, tanks and little-used taps and showers, the conditions legionella bacteria like. Ablution areas that are packed on Fridays and quiet midweek are similar. The trustees, committee or other body responsible for the building has a duty to manage that risk under HSE guidance (ACoP L8), and running taps for a few minutes before a group arrives is a sensible habit. We do the plumbing side: removing dead legs, fixing little-used outlets, tank and cylinder work and fitting mixing valves. If your building is listed or alterations need approval, get it first.

Services

Which of our services matter most to places of worship and community halls?

Questions

Questions about plumbing for places of worship and community halls

Can you service the boiler in our church, mosque or hall?

If it is a domestic-sized boiler, yes. Our Gas Safe engineers service and repair domestic-sized boilers and appliances. Many larger places of worship have commercial boilers, which need engineers with commercial gas qualifications. Send us the make and model, or a photo of the data plate, and we will tell you straight whether it is something we can do.

Can you build or refit a wudu area?

Yes. We plan and fit ablution facilities: rows of low-level taps with fixed seating, foot-washing positions, floor gullies or channel drains, anti-slip and easy-clean finishes, and thermostatic mixing valves. We size hot water and drainage for your busiest prayer time. Our electricians handle extractor fans, lighting and water heater circuits, so one team does the whole job.

Why does the building take so long to warm up?

Thick walls and high ceilings absorb a lot of heat before the air feels warm. Undersized radiators, sludge in the system or basic controls make it worse. Better timing, zoning and balanced radiators often help noticeably. We can look at your system and suggest practical improvements, starting with the ones likely to make the most difference.

How do we stop pipes freezing when the building is empty?

Lag pipes in unheated areas, keep a frost setting on the heating and make sure the frost thermostat actually works. Label the stopcock so anyone can find it. For long empty spells, draining down part of the system can be safer. We lag pipes, fit frost thermostats and isolating valves, and drain down and refill systems.

Can you work around worship times and hall bookings?

Yes. Tell us your prayer and service times, festivals, weddings, funerals and regular bookings, and we will plan around them, working on weekdays, early or late. Larger jobs such as an ablution refit can be phased so some positions stay in use. For a burst pipe or flooded WC there is a 24/7 emergency callout, and the price is agreed before work starts.

Other businesses we work for

Related sectors

  • Nurseries & Childcare

    Child-height toilets and basins, thermostatic mixing valves to prevent scalds, nappy-change sinks and warm rooms, with work done before children arrive or after they leave.

  • Sports Clubs & Studios

    Changing room refurbishment, team showers that stay hot after a match, drains that cope with mud, pavilion frost protection and studio WCs, planned around fixtures.

  • Art & Pottery Studios

    Clay and plaster trap sinks, deep belfast sinks for classes, hot water, heating for cold units and circuits for kilns, fitted around your studio timetable.

All commercial plumbing

Need something fixed at your premises?

Tell us what the premises are, what is wrong and when you are open, and we will agree a time and a price that work around your business.

Call 020 3576 5825 WhatsApp us

For ongoing maintenance or accounts, call management on 020 3576 5825.