Rising damp, penetrating damp or condensation?
The three types of damp can look almost the same on a wall, and treating the wrong one just wastes money without fixing anything.
- Gas Safe registered and fully insured
- DBS-checked engineers
- Emergency callout available 24/7
- Price agreed before work starts
- Workmanship guaranteed
Monday – Sunday, 7:00 AM – 10:00 PM · Out-of-hours emergency? Call 020 3576 5825
Need this looked at properly?
Three details get an engineer moving. The rest is optional.
Thanks — we’ve got it
We’ll come back to you on the number you gave us. If it’s urgent and you’d rather not wait, call 020 3576 5825.
01 September 2026
Damp on a wall is not one problem. It is usually one of three, and they need different treatments — so the first job is always working out which one you actually have, not reaching for a fix.
Condensation is the most common, and the easiest to check
Condensation shows up on cold surfaces — windows, north-facing walls, the corner of a room with poor airflow — and gets worse in cold weather, especially after cooking, showering or drying laundry indoors. It is caused by moist air meeting a cold surface, not by water getting into the building from outside. Fixing it is about ventilation, not waterproofing.
Penetrating damp comes in horizontally, from a specific defect
This kind can appear at any height on a wall, and there is almost always a specific external cause behind it: a cracked render, a gutter overflowing down the brickwork, a perished pointing joint. It gets worse in wet weather and tends to follow a pattern that traces back outside. Treating it means finding and fixing that defect, not covering the inside of the wall.
True rising damp is rarer than it is diagnosed
Rising damp travels up from the ground through the wall itself, and is limited to roughly the height groundwater can wick to — usually under a metre. A lot of what gets labelled rising damp is actually one of the other two, misread. Most older buildings without a damp-proof course cope fine for decades; a sudden new patch is more likely a fresh external defect than the ground deciding to start rising.
When it is worth getting a survey
If the pattern does not obviously match one of the three, or a company has already quoted a full damp-proofing course without inspecting the wall first, that is worth a second look. A proper survey uses a moisture meter and a visual inspection to work out which type it actually is before anyone talks about treatment — see damp survey and diagnosis for how that works.
- Cold surface, worse in winter, follows cooking or showering — condensation.
- Appears at any height, worse in wet weather, traces to an outside defect — penetrating damp.
- Confined to low on the wall, in an older building with no damp-proof course — possibly rising damp, but check first.
If a patch does not change with the weather, check for a hidden plumbing leak first with leak detection. Buying a house where the survey mentions damp? See whether you need a damp survey, or start at our damp and condensation page.
Pages that cover this properly
-
Leak Detection
Hidden leaks traced with acoustic and thermal equipment, before floors come up.
More on Leak Detection -
Damp Survey & Diagnosis
Before Ninja Plumbers proposes any treatment, we work out exactly what kind of damp it is and what’s causing it.
More on damp survey & diagnosis -
Damp Proofing & Penetrating Damp
Rather than papering over the symptom from inside, we trace penetrating damp back to the outside defect that is letting the water in.
More on damp proofing & penetrating damp -
Condensation & Ventilation Control
Steamed-up windows and black mould are usually a ventilation fault, not a cleaning job, and Ninja Plumbers deals with the cause rather than the symptom.
More on condensation & ventilation control
Prefer to have it looked at?
Tell us what’s happening and where you are, and we’ll tell you what it costs before anyone starts work.